UPDATED WEBSITE
PRYOR SERVICE LIMITED
SINCE 1979
Cryogenic Pumps & System,Pumps,Motors,
Engineers & Consultants
Welcome to PSL
​
Pryor Service Ltd. was incorporated in 1979 and specialises in services and repair of liquid gas pumps for use with LPG, LNG and Ammonia products. Predominately used in the gas industry. Shipping unloading pumps and gas processing plants, our clients include many of the large shipping and oil and Gas operators throughout the world. We operate globally and are based in our modern UK based Facility on the South coast of UK. We offer consultancy and service repair all makes of cryogenic equipment using OEM parts and procedures and operate to ISO standards.
​
PSL was awarded "Authorised Repair Centre" by Ebara International Corporation USA in 2012, and has been authorised service engineers since 1979.
ABOUT US
​
Established in 1979 we specialise in the service and repair of cryogenic pumps and systems. Our clients include many of the large shipping and oil and Gas operators throughout the world. We operate out of our modern UK based Facility on the South coast of England. We service are repair all makes of cryogenic equipment using OEM parts and procedures and operate to ISO standards. PSL has been serving the gas industry worlwide for over 40 years.
OUR SERVICES
LPG LNG Cargo pump consultantcy
Cryo pump service Repair
Shaft straighten and balance
Rotor Stator test and repair.
Norm Radiation handling.
Fit machine bushing wear rings
Cryogenic component testing
We offer consultancy for service repair and commisioning of cargo pumps and related equipment. We will assist you in process of managing your overhauls and scheduling repairs to meet your deadlines. We can assist with recommended spare parts procurement and assist with sourcing parts for issues that arise during dockings and maintenance.
We offer support for FSO FPSO conversiions and emergency repairs.
Consultancy subsciptions for customer support available.
CONSULTANTCY
MACHINING
We are able to undertake low volume machining of medium to large components. Horizonal boring,turning.milling and surface finishing.
​
​​
-
Overhead crane for equipemt up to 10T and pumps 5M in length.
-
completes machine shop facilities,
-
dynamic balancing,
-
1400Ltr LN2 storage for shrink fitting and stress relieving parts
-
Safe working pit for assembly area
-
Electrical testing equipment
​
We are able to undertake work on many pumps and are specialist in the shaft repairs, reconditioning and shrink fitting, machining of rings, bushings and linings.
​​
​​
DYNAMIC BALANCING​​​
All components of an assembly that are required to rotate should be balanced, examples of such components are fans, rotors, impellers and shafts. Imbalance in a part causes unwanted vibration which in turn can cause many other problems such as increased wear to components, loud noise, decreased performance of components and catastrophic failure.
Dynamic balancing is a method of measuring the imbalance in a component using electronic equipment whilst the part is rotated at high speeds, once imbalance is measured it can be corrected by adding or removing material from a part in the appropriate location. In some cases a part may become imbalanced due to bending and can be corrected using a procedure of straightening.
At our UK based facility in Dorset UK we can provide balancing services for shafts motors up to 3 tons. We use an overhead crane capable of carrying up to 10 tons.
CRYO SHRINK
FITTING
COMPONENTS​​
Shrink fitting is a method of fitting components that use an interference fit, it does this using thermal contraction i.e. a component such as a bushing can be cooled using liquid nitrogen (LN2) which causes it to become smaller and easily fit into it’s register until it returns to ambient temperature and it’s original size. This method is better than fitting the components using force or heat because it won’t damage the surfaces of the components.
​
MACHINARY MAINTENANCE REPAIRS
Servicing electric motor and pumps for the power and gas industry.
CRYOGENIC PUMP
REPAIR AND SERVICING
We have been serving the gas industry for over 40 years service repairs to submersible cryogenic pumos. We have experience with Shinko, Cryostar, Airco,J.C Carter and have been authorised agent for Ebara Int in the uk for over 10 years. We have experience with ship-board and shore based plant pumps up to 7.5 tons. We are licensed by the environments agency to be compliant with naturally occurring radiation, and can clean and decontaminate during disassembly. MAINTENANCE REPAIRS
EBARA
International Corporation Authorised Service Center
​
PSL has worked closely with Ebara International Corporation, USA, since 1989 as authorised service engineers and during December of 2012 became an authorised service centre for EIC in the UK, and covering many parts of Europe. Our clientèle includes many major energy companies that use cryogenic pumps as well as many large shipping and ship management organisations worldwide.
We work to EIC procedures and standards for service and repair, LPG and LNG pumps used for gas processing plants and shipping companies, this involves
​
​
-
Thorough inspection and examination of equipment/parts using precise measuring instruments allowing us to check critical dimensions and tolerances according to OEM drawings and procedures.
-
Replacing worn and damaged parts with OEM parts from Ebara.
-
Refurbishing and modifying damaged equipment using specialist machining in our modern facility.
-
Straightening and resurfacing pump shafts within the necessary tolerances.
-
Dynamic balancing of shafts and impellers individually and as an assembly.
-
Shrink fitting and machining of wearing surfaces
​
